Turkish-made PPR ball valves, stop valves, brass double-union valves, underfloor-heating manifolds, radiator valves and solar sets, all produced in the same material and color range as our PPR pipe, so nothing mismatches at the joint. 30 years of manufacturing, exported to 118+ countries, certified SKZ / ISO / CE / WRAS.
We supply PPR valves and manifolds wholesale to importers, distributors, contractors and OEM brands, not single-item retail.
The valve is where a PPR system is most likely to leak or seize, so it is the part importers and contractors worry about most. We manufacture the full valve range on our own molds, each with a genuine brass insert where it seals, and each matched in material and color to our PPR pipe so it fuses cleanly at the joint. From the everyday isolation ball valve to the America stop valve, the slow-opening angle valve and the brass double-union ball valve, one factory covers the whole isolation and control range across 20–63 mm, no second supplier, no mismatched thread standards, no color that clashes on the wall.
| Ball valve | Brass double-union ball valve, full-bore isolation |
| Stop valve | Stop valve, America stop valve, slow-opening straight & angle |
| Brass-union valve | Brass valve & brass double-union valve with brass insert |
| Valve head / accessories | Valve head, plug with air valve, PPR filter with brass nut |
| Radiator valve | Elbow, straight & angle types for heating circuits |
Every valve carries a fixed Bekaatherm article number and a defined size band, so importers can quote line-by-line, contractors can specify to a PN grade, and wholesalers can build a complete matched shelf. Brass-core valves run the full 20–63 mm PPR range; America stop and slow-opening valves are threaded to 1/2″–3/4″. Wall thickness, weight and carton quantity per article are available on request.
| Valve | Article no. | Size range | Sealing core | Typical duty |
|---|---|---|---|---|
| Stop Valve | BK-182–187 | 20 · 25 · 32 · 40 · 50 · 63 mm | Brass insert | Hot & cold water isolation |
| Brass Valve | BK-191–196 | 20 · 25 · 32 · 40 · 50 · 63 mm | Brass core | In-line isolation, high durability |
| Brass Double Union Ball Valve | BK-197–202 | 20 · 25 · 32 · 40 · 50 · 63 mm | Brass core, double union | Full-bore isolation, serviceable |
| America Stop Valve | BK-203–205 | 20×1/2 · 25×3/4 · 32×3/4 | Brass insert | Threaded stop / regulation |
| Valve Head | BK-188–190 | 20×1/2 · 25×3/4 · 32×1F | Brass thread | Concealed body + head assembly |
| Straight / Angle Valve (slow opening) | BK-277–280 | 20×1/2 · 25×3/4 | Brass insert | Appliance & fixture shut-off |
| PPR Filter with Brass Nut | BK-236–241 | 20 · 25 · 32 · 40 · 50 · 63 mm | Brass nut | In-line strainer, debris protection |
| Filter (iron) | BK-242–247 | 20 · 25 · 32 · 40 · 50 · 63 mm | Iron body | Coarse-line filtration |
Pressure ratings follow the PPR system grade, PN20 (20 bar @ 20 °C) and PN25 (25 bar), with exact per-article ratings, wall thickness and carton data confirmed on request.
A closer look at the brass-core valves, multi-port manifolds, unions and heating accessories we mold in-house, all produced in the same green, white and coffee range as our PPR pipe.
For underfloor heating and multi-loop distribution, the manifold has to match the number of circuits your project runs, and connect to the rest of the system without adapters. We manufacture multi-port manifolds from 2-way to 5-way as part of the same PPR range, so they tie straight into our pipe, radiator valves and solar sets. Bodies come in 32 and 40 mm with 1/2″F outlets, in plain and female-threaded variants; flow control and air-vent options are available on request.
| Ports | 2W · 3W · 4W · 5W, configured to your number of heating loops |
| Body size | 32 & 40 mm main, 1/2″F outlets |
| Variants | Standard manifold & manifold with female thread |
| Application | Underfloor heating, radiator circuits, water distribution |
| Flow control | Available on request |
| System match | Same PPR material & color range as our pipe & fittings |
The distribution and heating side of the range, manifolds, radiator valves, air-vent plugs, shelves and the solar & radiator set, carries the same article-number discipline as the valves. Port count, thread standard and size band are fixed per article so you can build a complete underfloor-heating or solar package in one order.
| Component | Article no. | Size / ports | Role in the system |
|---|---|---|---|
| Manifolds (2–5 way) | BK-206–213 | 32/40 × 1/2″F × 2W · 3W · 4W · 5W | Distribute flow across heating loops |
| Manifolds with Female | BK-214–219 | 32/40 × 1/2″F × 2W–5W | Female-threaded manifold for mixed connections |
| Radiator Valve (straight / elbow) | BK-257–276 | S/L 20–25 × 1/2–3/4 M | Isolate & balance radiator circuits |
| Solar & Radiator Set | BK-281–282 | 25 × 1/2–3/4 | Accessory set for solar hot-water & heating |
| Plug with Air Valve | BK-254–256 | 25 · 32 · 40 mm | Venting on heating manifolds & circuits |
| Shelf | BK-251–253 | 25 · 32 · 40 mm | Mounting support for concealed lines |
| Cap | BK-248–250 | 20 · 32 · 40 mm | Line termination & test capping |
Solar hot-water and heating circuits run hot, and cheap accessories soften, distort or leak under that load. Our radiator valves (elbow, straight, angle) and solar & radiator sets are engineered for high-temperature service and matched to our fiberglass and aluminum-composite PPR pipe, the pipe grades built for heating. For solar and underfloor projects we supply the pipe, manifold, radiator valves and solar set as one coordinated system rather than parts from four suppliers, so nothing softens at the first hot summer or seizes after a season of thermal cycling.
| Radiator valve (elbow / straight / angle) | Isolate and balance radiator circuits |
| Solar & radiator set | Accessory set for solar hot-water & heating |
| Plug with air valve | Venting on heating manifolds & circuits |
| Recommended pipe | Fiberglass or aluminum-composite PPR (low expansion, heat-rated) |
Our valves, manifolds and heating accessories cover the full application map of a modern building, concealed hot & cold water, ceiling distribution, radiator heating and underfloor manifold loops, with the same brass-core sealing and the same matched PPR body throughout.
Ball and stop valves seal on a brass core that lasts inside the wall, because replacing a seized $2 valve means tearing out tile.
Full-bore isolation valves and unions let you branch and service overhead distribution without cutting the line.
Elbow, straight and angle radiator valves isolate and balance each emitter, matched to heat-rated composite pipe.
2–5-way manifolds feed underfloor loops with flow control and air-vent options, tied straight into our pipe.
“Brass” is the claim that fails buyers most often, recycled or under-spec metal seizes and leaks once it’s sealed inside a wall, and that means tearing out tile to replace a $2 valve. We treat brass as a spec, not a label: our ball valves, stop valves and double-union valves seal on a genuine brass insert, molded on our 10,000-tool injection base for a precise, repeatable fit. Every valve is produced under SKZ, ISO, CE and WRAS certification, the same certificates we can share so you verify quality before you commit to bulk.
Germany, audits product quality and factory production.
ISO TYPE-5 quality & conformity.
European market conformity.
Drinking-water safety (UK).
The biggest hidden cost in piping is mismatched parts: a valve from one factory that won’t fuse cleanly to pipe from another, or a manifold in a color that clashes on the wall. Because we make the whole system, you get one matched supply:
PN-rated valves and manifolds that match your pipe, with full technical docs and batch consistency for inspection.
Projects & contractorsManifolds, radiator valves and solar sets engineered for high-temperature systems, matched to composite pipe.
Solar & underfloor heatingThe full valve, manifold and accessory range in matched colors, best-sellers in stock, FOB pricing, Low MOQ, export docs.
Importers & distributorsFor the Contractor: We manufacture 2-way to 5-way PPR and heating manifolds (BK-206–219) sized to the number of loops your project runs, in 32 and 40 mm bodies with 1/2″F outlets, with flow-control and air-vent options on request. Because they share our PPR material and color range, they tie into our pipe and radiator valves without adapters, ask our export team for the exact port configurations for your job.
For the Project Buyer: Yes, our ball valves, stop valves and double-union valves (BK-182–202) seal on a genuine brass insert, not recycled metal, molded on our 10,000-tool base for a precise fit. Every valve is certified to SKZ, ISO, CE and WRAS, and we can share the certificates so you verify quality before ordering bulk.
For the Solar / Underfloor Integrator: Our solar and radiator sets (BK-281–282) and radiator valves are engineered for high-temperature heating and solar hot-water service, matched to our fiberglass and aluminum-composite PPR pipe. Exact ratings are confirmed per component on request, for these projects we recommend supplying pipe, manifold and sets as one coordinated system.
For the Wholesaler: Yes, valves, manifolds, radiator valves and solar sets are produced in the same material and color (green, white, coffee) as our PPR pipe, from one factory. That lets you stock a complete matched range on the shelf, and it means heat-fusion joints fit, no mismatched parts, no multi-supplier sourcing.
For the Project Buyer: Brass-core valves run the full PPR range from 20 mm to 63 mm; America stop and slow-opening valves are threaded to 1/2″–3/4″. Pressure follows the PPR system grade, PN20 (20 bar @ 20 °C) and PN25 (25 bar), with exact per-article ratings, wall thickness and weight confirmed on request.
For the OEM Brand: Yes, the full valve, manifold and accessory range is available for OEM & private label with your color, logo and packaging, and regional exclusivity is available. You get one matched system under one brand, backed by SKZ / ISO / CE / WRAS. MOQ is low; specific MOQ, lead time and pricing come back with your quote.
Valves and manifolds are one part of a system built to fit together. Explore the pipe grades they connect to, the fittings that complete the range, and the solutions and OEM programs that turn one factory into a full supply line.
Tell us the valves, manifolds and sets you need, your market and your volume. Our export team will come back with specs, certification, MOQ and FOB pricing, and can quote the complete matched PPR system in one shot.
Explore the system: PPR Pipes · PPR Fittings · Solar & Underfloor Heating · OEM & Private Label
