Black HDPE water pipe with blue PP mechanical compression fittings, sockets, elbows, tees, ball valves and saddle clamps, for outdoor supply, irrigation and municipal networks. 20–110mm fittings, saddle clamps to 315mm, all PN10 and weld-free. Made in Türkiye, exported to 118+ countries, SKZ / ISO / CE / WRAS certified.
We supply HDPE pipe and fittings wholesale to importers, distributors, wholesalers and project buyers, not single-item retail.
Outdoor water networks live and die on the joint. Bekaatherm builds a single, matched system for them: black HDPE pipe carrying the water, and blue PP mechanical compression fittings making every connection by hand. There is no butt-fusion machine, no electrofusion controller and no open flame on site, the joint is made by tightening a compression nut so a gripping ring seals onto the pipe wall. That is why crews on rural mains, farm irrigation and municipal extensions reach for compression: it goes in fast, in the trench, in any weather. The whole range is PN10 rated and molded in-house on our own tools, alongside our PPR pipe, fittings and valves, so an importer sources HDPE fittings and the rest of the bill of materials from one Turkish factory. See the real article numbers and sizes below, then request the catalogue for weights and packing.
Sockets, elbows, tees & caps, 20–110mm. Hand-tightened mechanical joint, no fusion equipment.
See the range
Compression ball valves (Anne Panaflexe) & female valves, 20–110mm, for isolating HDPE runs.
See the range
Single & double saddle clamps, PN10, up to 315mm, for branching and tapping large HDPE mains.
See the range
Female & male compression fittings, 1/2″ to 4″, for connecting HDPE to metal, valves & tapware.
See the rangeEvery part below is a real catalogue line with its own article-number band, so importers and wholesalers can see the range is complete, from a plain compression socket to a 315mm saddle clamp. Fittings, valves and caps run 20mm to 110mm; saddle clamps for mains tapping extend to 315mm (6 inch). The whole system is rated PN10 for outdoor water supply and irrigation. French labels in the catalogue (Coude, TE, Ambout, Anne Panaflexe) also serve French-speaking markets.
| Fitting | Article no. | Sizes |
|---|---|---|
| Socket (coupler) | BK-387–395 | 20 · 25 · 32 · 40 · 50 · 63 · 75 · 90 · 110 |
| Reduce Socket | BK-396–406 | 25×20 → 63×50 (multiple combinations) |
| Female Socket | BK-407–418 | 20×1/2″ → 110×4″ |
| Male Socket | BK-419–438 | 20×1/2″ → 110×4″ |
| Elbow | BK-439–447 | 20 · 25 · 32 · 40 · 50 · 63 · 75 · 90 · 110 |
| Female / Male Elbow | BK-448–469 | 20×1/2″ → 63×2″ |
| Tee (equal) | BK-470–478 | 20 · 25 · 32 · 40 · 50 · 63 · 75 · 90 · 110 |
| Reduce Tee | BK-479–485 | 25×20×25 → 63×50×63 (multiple combinations) |
| Female / Male Tee | BK-486–505 | 20×1/2″ → 63×2″ |
| Cap / Ambout (end cap) | BK-506–514 | 20 · 25 · 32 · 40 · 50 · 63 · 75 · 90 · 110 |
| Valve | Article no. | Sizes |
|---|---|---|
| Compression Ball Valve (Anne Panaflexe) | BK-515–532 | 20 · 25 · 32 · 40 · 50 · 63 · 75 · 90 · 110 |
| Compression Female Valve (Anne Panaflexe) | BK-533–541 | 20×1/2″ → 110×4″ |
| Clamp | Article no. | Sizes |
|---|---|---|
| Saddle Clamp PN10 | BK-542–605 | 25×1/2″ → 315×6″ |
| Double Saddle Clamp PN10 | BK-606–669 | 25×1/2″ → 315×6″ |
Article numbers span BK-387 to BK-669 across the compression range. Dimensions are pipe OD in mm; threaded sizes in inches (BSP). Pressure class PN10. Weights, packing and lengths of the black HDPE pipe available on request.
Compression fittings are the outdoor half of a piping supplier’s job: pressurised, buried and weld-free. The same PN10 range covers a farmer’s drip line, a village supply extension and a contractor tapping a 315mm municipal main, no site fusion equipment required. Match the application to the size band; we ship the whole system from one floor.
Black HDPE pipe with compression sockets, elbows and tees for buried supply mains and house connections. The weld-free joint lets crews extend a line in the trench, in any weather, without power or a fusion machine. → See the range
Field and orchard irrigation networks where lines are laid, moved and re-tapped every season. Saddle clamps take off laterals anywhere along the main; compression valves isolate zones, all reusable and tool-light. → Projects & Contractors
Single and double saddle clamps to 315mm let a utility branch a service off a live large main without cutting the line. PN10 rated, with threaded transitions to meters, valves and metal fittings. → Importers & Distributors
Most buyers source outdoor compression fittings from one vendor and indoor PPR from another, then juggle two sets of certificates, two lead times and half-empty containers. Because Bekaatherm molds the full PP compression range in-house, alongside PPR pipe, fittings and valves, an importer consolidates outdoor HDPE fittings and indoor supply into one mixed container, under one SKZ / ISO / CE / WRAS compliance set. Weld-free connection keeps field labour low; PN10 keeps the network compliant.
| Weld-free joint | No fusion machine or flame on site |
| PN10 rated | Outdoor supply, irrigation, municipal |
| 20–315mm | Fittings to 110mm · saddle clamps to 315mm |
| Full BOM in one place | Outdoor HDPE + indoor PPR, one factory |
| Matched certification | One SKZ / ISO / CE / WRAS set |
| Low MOQ per line | Test or restock any part |
Source HDHDPE / PP compression fittings under one SKZ / ISO / CE / WRAS set, mix outdoor and indoor categories in one container, and secure stable reorders by country. 118+ countries served.
Get FOB pricingStock the full 20–315mm compression range, sockets, valves and saddle clamps, from one factory so your counter is complete on the first order. Low MOQ, shelf-ready.
Explore the rangePN10-rated compression for outdoor mains and irrigation, weld-free for fast trench work, with consistent batches and technical files for municipal approval.
Request technical dataThe compression range is produced from 100% high-standard raw material and certified to German SKZ, described in the industry as the most rigorous piping certification, auditing both product quality and factory production, plus ISO TYPE-5, CE and WRAS. Behind it: 30+ years of PPR / PE manufacturing, a 120,000 m² plant, 1000+ staff and 10,000 molds. That combination is why importers in 118+ countries clear customs and reorder with confidence.
Germany, audits product quality and factory production.
ISO TYPE-5 quality & conformity.
European market conformity.
Drinking-water safety (UK).
Certificate numbers and copies are available on request.
For the Importer: Bekaatherm is a Turkish manufacturer. We mold the full PP compression range in-house on our own tools, alongside PPR pipe, fittings and valves, so you source HDPE fittings and the rest of the BOM from one certified factory. Same compliance set, exported to 118+ countries.
For the Project Buyer: Compression fittings run 20mm to 110mm across sockets, elbows, tees, caps, ball valves and threaded transitions. Saddle clamps and double saddle clamps for mains tapping extend to 315mm (6″). Every part is rated PN10 for outdoor water supply and irrigation.
For the Contractor: No. These are mechanical compression fittings, the joint is made by tightening a compression nut so a gripping ring seals onto the HDPE pipe. No butt-fusion, electrofusion or heating tools are required, which speeds up trench work on outdoor and municipal networks in any weather.
For the Utility Buyer: A saddle clamp wraps a live HDPE main and lets you branch off a service without cutting the line. Ours are PN10, single and double, from 25×1/2″ up to 315×6″, so you tap everything from a house connection to a large municipal main. Article numbers BK-542 to BK-669.
For the OEM Brand: Yes. The range carries SKZ, ISO TYPE-5, CE and WRAS, made from 100% high-standard raw material, with matching documentation for customs and potable water across 118+ countries. We also offer OEM / private label so you brand the compression range as your own.
From compression sockets and ball valves to 315mm saddle clamps, PN10 rated, weld-free, one certified source. Tell us your market and sizes; we’ll send the full catalogue with article numbers, MOQ, mixed-container options and a quote.
Explore the range: Full Range · PPR Pipes · PPR Fittings · UPVC Drainage
