SDR and PN classes, butt fusion against electrofusion against compression, flanges and stub ends, and how PE meets PPR, steel and existing mains. Referenced to ISO 4427 and EN 12201.
The container clears customs, the fittings look right, and six weeks later a joint on the new main is weeping. Electrofusion welding is the one HDPE…
Read the guide
What gets a buried HDPE line rejected: backfill grading, the compaction test nobody names, thermal movement before tie-in, and the pressure-test clock.
Read the guide PE 80, PE 100 and PE 100-RC explained by MRS and design stress, with the ISO 4427 tables that show why the same PN 10 needs…
Read the guide
Search for HDPE pipe manufacturers and you get a list of companies. Not one of them tells you the thing you actually need in order to…
Read the guide
A container of black pipe lands at Mersin. The packing list says DN 110 SDR 11, the pipe measures 110.6 mm across the outside, and the…
Read the guide
Double-wall corrugated HDPE pipe and solid-wall HDPE pipe are not two grades of the same product. They are answers to two different load questions, and they…
Read the guide
Choosing an HDPE pipe manufacturer is mostly a documents problem, not a factory problem. You will probably never stand on the production floor. What you will…
Read the guide
A spec sheet is a fragment of your contract. If a number is missing from the catalogue, it is missing from the deal — and the…
Read the guide
Search for a torque figure for a PE compression fitting valve and you will find plenty of numbers. None of them come from a standard. No…
Read the guide
One tee, two decisions: the diameter that keeps velocity under control, and the joint that a farm hand can open again next season without a fusion…
Read the guide