Turkish-made PPR pipes for hot and cold potable water and heating, pure PPR, fiberglass-composite and PPR-AL-PPR aluminum-composite, sizes 20–63mm, in green, white and coffee series. SKZ, ISO, CE & WRAS certified, made in Türkiye and exported to 118+ countries.
We supply PPR pipe wholesale to importers, distributors, contractors and OEM brands, not single-item retail. We do not sell individual lengths to consumers.
Not every line needs the same PPR. The right structure depends on temperature, pressure and where the pipe runs. We manufacture all three under one roof from 100% high-standard virgin PPR-R raw material, so importers and project buyers source pure PPR, fiberglass-composite and aluminum-composite from a single supplier with consistent color and batch quality. Because everything shares one resin standard, one color library and one mold bank, a distributor can build a full catalogue page, pipe, matching fittings and matching valves, without cross-supplier color drift or batch mismatch on the wall.
Single-layer virgin PPR-R random copolymer for domestic hot & cold potable water. The volume workhorse of any supply line, heat-fused, corrosion-free and food-grade.
PN20 / PN25
A middle glass-fiber layer cuts thermal expansion by roughly two thirds versus pure PPR, lighter than aluminum composite and fully weldable without stripping the layer back. Ideal for heating risers.
PN20 / PN25
A continuous aluminum middle layer adds a full oxygen barrier, the lowest thermal expansion of the three and UV resistance for exposed or radiator-heating runs where the pipe sees daylight.
PN20 / PN25| Structure | Layer construction | Key benefit | Best for | Pressure |
|---|---|---|---|---|
| Pure PPR | Single-layer virgin PPR-R | Food-grade, corrosion-free, lowest cost per metre | Domestic hot & cold potable water | PN20 / PN25 |
| PPR Fiberglass Composite | PPR / glass-fiber / PPR, three layers | Low thermal expansion, no layer stripping to weld | Heating & hot-water lines, risers | PN20 / PN25 |
| PPR-AL-PPR Aluminum Composite | PPR / aluminum / PPR, three layers | Oxygen barrier + lowest expansion + UV resistance | Exposed runs, radiator heating, UV areas | PN20 / PN25 |
This is the table contractors and importers actually specify from. Every outer diameter from 20mm to 63mm, in all three structures, pure PPR, PPR-AL-PPR aluminum composite and glass-fiber composite, at both PN20 and PN25, with exact outer-diameter × wall-thickness figures and the article-number ranges we produce. No “contact us for specs”: the hard data is right here. The walls follow the DIN 8077 dimensional series, S3.2 for PN20 and S2.5 for PN25, with the corresponding pipe requirements in ISO 15874-2:2013, so every figure below can be checked against a published standard rather than taken on trust.
| OD (mm) | Pure PPR · PN20 | Pure PPR · PN25 | AL-Composite · PN20 | AL-Composite · PN25 | Fiberglass · PN20 | Fiberglass · PN25 |
|---|---|---|---|---|---|---|
| 20 | 20 × 2.8 | 20 × 3.4 | 20 × 3.1 | 20 × 3.4 | 20 × 2.8 | 20 × 3.4 |
| 25 | 25 × 3.5 | 25 × 4.2 | 25 × 3.3 | 25 × 4.2 | 25 × 3.5 | 25 × 4.2 |
| 32 | 32 × 4.4 | 32 × 5.4 | 32 × 4.1 | 32 × 5.4 | 32 × 4.4 | 32 × 5.4 |
| 40 | 40 × 5.5 | 40 × 6.7 | 40 × 5.0 | 40 × 6.7 | 40 × 5.5 | 40 × 6.7 |
| 50 | 50 × 6.9 | 50 × 8.4 | 50 × 5.5 | 50 × 8.4 | 50 × 6.9 | 50 × 8.4 |
| 63 | 63 × 8.6 | 63 × 10.5 | 63 × 7.0 | 63 × 10.5 | 63 × 8.6 | 63 × 10.5 |
All figures are outer diameter × wall thickness in millimetres. Values from our official product catalogue. Coil and straight-length options, packaging and weights per metre available on request.
Model coverage matters to buyers who reorder against a catalogue. Each structure and pressure rating carries its own article-number block, so you can quote, PO and reconcile against a stable code system across the whole 20–63mm range.
| Structure & rating | Article numbers | Sizes |
|---|---|---|
| Pure PPR · PN20 | BK-001 – BK-006 | 20–63mm |
| Pure PPR · PN25 | BK-007 – BK-012 | 20–63mm |
| PPR-AL-PPR · PN20 | BK-01 – BK-06 | 20–63mm |
| PPR-AL-PPR · PN25 | BK-07 – BK-12 | 20–63mm |
| Fiberglass · PN20 | BK-13 – BK-18 | 20–63mm |
| Fiberglass · PN25 | BK-19 – BK-24 | 20–63mm |
“PN” is the nominal pressure a PPR pipe safely carries at 20°C, and specifying it wrong is the fastest way to a burst line and a rejected batch. We manufacture both PN20 and PN25 across the full size range, so contractors match the rating to the application instead of over- or under-buying. The two ratings share the same outer diameters and the same sockets; PN25 simply carries a thicker wall for higher-pressure and higher-temperature service. In standards terms the two classes are the DIN 8077 S3.2 and S2.5 wall series, verified against the hydrostatic-strength and thermal-stability requirements of ISO 15874-2, with the general quality regime set by DIN 8078.
| Rating | Pressure at 20°C | Wall (e.g. 32mm) | Typical application |
|---|---|---|---|
| PN20 | 20 bar | 32 × 4.4mm | Domestic hot & cold water, the volume workhorse |
| PN25 | 25 bar | 32 × 5.4mm | High-pressure / high-temperature heating & industrial lines |
Both ratings are available in pure PPR, fiberglass-composite and aluminum-composite, sizes 20–63mm. Full wall-thickness figures for every size are in the dimension table above.
PPR pipe is only half a system. Buyers stock it alongside matching sockets, tees, elbows, unions and brass-insert fittings in the same resin and the same color. Here is a slice of the coordinated range that ships with the pipe.
The same PPR family serves every wet application in a building, which is exactly why importers and contractors standardise on it: one weldable material, one supplier, from the drinking-water riser to the underfloor manifold to the rooftop solar loop.
Domestic and commercial hot and cold supply. Heat-fused joints carry hot water without softening or creep at rated pressure and temperature.
100% virgin PPR-R, food-grade and WRAS-approved for contact with drinking water, no rust, no scale, no taste transfer.
Low-expansion fiberglass and aluminum-composite pipe feed underfloor and wall-heating manifolds where movement and oxygen ingress must be controlled.
PPR-AL-PPR aluminum composite adds an oxygen barrier and UV resistance for radiator circuits and exposed solar hot-water runs on the roof.
Also used for compressed air, industrial fluid transfer and air-conditioning condensate lines, talk to us about the application and we will confirm structure, PN and size.
A PPR joint is not a mechanical seal that can loosen or a glue line that can fail, it is a heat-fusion weld that turns pipe and fitting into a single homogeneous piece of polypropylene. Heat the pipe and socket on a welding machine, push them together, and the two melt into one wall. The result: no gaskets, no adhesives, no leak points buried in the wall, and joints as strong as the pipe itself.
We also supply the tooling: PPR hot-melt welding machines (20–63mm), pipe cutters and PTFE tape, so a distributor can offer the pipe, the fittings and the install kit as one line.
Color is a merchandising and market decision, and cheap suppliers can’t hold it batch to batch. We produce PPR pipe in green, white and coffee (brown) series, with matching fittings and valves in the same material and color, so wholesalers stock a complete, shelf-consistent range and importers match regional market preferences. 10,000 molds keep color and dimension consistent from first order to reorder. Every series shares the identical dimension table above, so switching color never changes a spec.
Sourcing sizes from multiple suppliers means color drift and batch mismatch on the wall. We manufacture the full PPR range from 20mm to 63mm outer diameter across every structure and both pressure ratings, so a project buyer specifies an entire hot-and-cold system, risers, branches and connections, from one factory with one raw-material standard.
| Outer diameter | Structures available | Pressure |
|---|---|---|
| 20mm | Pure PPR · Fiberglass · Aluminum composite | PN20 / PN25 |
| 25mm | Pure PPR · Fiberglass · Aluminum composite | PN20 / PN25 |
| 32mm | Pure PPR · Fiberglass · Aluminum composite | PN20 / PN25 |
| 40mm | Pure PPR · Fiberglass · Aluminum composite | PN20 / PN25 |
| 50mm | Pure PPR · Fiberglass · Aluminum composite | PN20 / PN25 |
| 63mm | Pure PPR · Fiberglass · Aluminum composite | PN20 / PN25 |
Metric and inch sizing reference available on the spec sheet. Exact wall thickness per size is in the full dimension table above. Our PPR range runs 20–63mm; for larger diameters see our HDPE range, which goes to 315mm.
For importers, a missing certificate isn’t a quality footnote, it’s a container stuck at the port. Our PPR pipe is produced from 100% high-standard virgin raw material and certified by the German SKZ, described in the piping industry as one of the strictest certifications, auditing both product quality and factory production, alongside ISO 15874, CE and WRAS. Those certificates are issued against published standards you can read yourself: ISO 15874-1:2013 for the general requirements of PP hot- and cold-water systems, ISO 15874-2:2013 for the pipe itself, and ISO 15874-5 for fitness for purpose of the assembled system. WRAS specifically confirms suitability for drinking-water contact, so you can specify and clear our pipe for potable systems with confidence.
Germany, product quality + factory production audit (industry-strictest).
ISO 15874-1/-2/-3/-5 conformity, also published as EN ISO 15874.
European conformity for market access.
Suitability for contact with drinking water.
| SKZ (Germany) | Product quality + factory production audit, industry-strictest |
| ISO 15874 | Parts -1 (general), -2 (pipes), -3 (fittings), -5 (system fitness for purpose) |
| Dimensional standard | DIN 8077 (dimensions) · DIN 8078 (general quality requirements) |
| CE | European conformity for market access |
| WRAS | Suitability for contact with drinking water |
| Raw material | 100% high-standard virgin PPR-R |
| Certificate numbers | Available on request |
Certificate numbers and copies are available on request.
For brand owners and regional distributors, a private label turns a commodity into your line. With 30 years of manufacturing, 10,000 molds and 100% virgin raw material, we produce PPR pipe under your brand, your color series, printed logo and packaging, with the certification backing (SKZ/ISO/CE/WRAS) to protect your name in-market. Low MOQ lets you launch a private-label range without over-committing.
FOB pricing, container-load efficiency, full SKZ/ISO/CE/WRAS documentation for smooth clearance, and reliable reorders across the whole range. 118+ countries served.
Get a QuoteMatched PN20/PN25 ratings, the full 20–63mm range in one batch, and technical docs, PN table, dimension table and certificates, for your submittals.
Download Spec SheetYour color, logo and packaging on certified pipe, Low MOQ, and regional exclusivity to talk through, same certified factory, batch to batch.
Request OEMFor the Contractor: PN20 carries 20 bar at 20°C and is the standard for domestic hot and cold water. PN25 has a thicker wall rated for 25 bar, specified for higher-pressure or high-temperature heating and industrial lines. At 32mm, for example, PN20 is a 4.4mm wall and PN25 a 5.4mm wall on the same 32mm outer diameter. We manufacture both across the full 20–63mm range and all three structures, so you match the rating to the job.
For the Importer: Both add a middle layer that cuts thermal expansion versus pure PPR. Fiberglass-composite is lighter and fully weldable without stripping, ideal for heating and hot-water lines. PPR-AL-PPR aluminum-composite adds an oxygen barrier and UV resistance for exposed or radiator runs. We supply both in PN20 and PN25, sizes 20–63mm, so you can stock for either demand.
For the Project Buyer: The full range is 20, 25, 32, 40, 50 and 63mm outer diameter, in pure PPR, fiberglass and aluminum composite, at PN20 and PN25. Walls run from 20×2.8mm (pure PPR PN20) up to 63×10.5mm (PN25). Every combination has its own article number, and the complete dimension table is published on this page and in the downloadable spec sheet.
For the Distributor: Yes. Our PPR pipe is made from 100% high-standard virgin PPR-R raw material and certified by SKZ, ISO, CE and WRAS. WRAS specifically confirms suitability for contact with drinking water, so you can specify and clear it for cold and hot potable systems without a compliance question mark on your submittal.
For the Wholesaler: Yes, pipe, fittings and valves are produced in the same virgin resin and the same green, white or coffee color, from 10,000 molds that hold dimension and shade batch to batch. A single order can cover sockets, tees, elbows, unions, brass-insert fittings, valves and manifolds alongside the pipe, so you stock a complete shelf-ready system from one factory.
For the OEM Brand: PPR pipe from virgin raw material offers a long service life under rated pressure and temperature, with heat-fused joints that remove leak points instead of relying on glue or gaskets. Backed by 30 years of manufacturing and SKZ/ISO/CE/WRAS certification, it carries the durability your private label needs to protect its name in-market.
Written by the people who run the extrusion lines and the export desk, not outsourced writers.
How to read a PPR pipes and fittings catalogue PDF: what part numbers encode, why PN is not your working pressure, and…
Read the guide
Ask ten suppliers what PPR pipe colour means and you will get ten confident answers, most of them wrong. Green is potable.…
Read the guide
Everything that decides whether a pipe reaches year thirty or year three happens before it leaves the haul-off: resin grade, stabiliser package,…
Read the guideTell us your target structure (pure PPR / fiberglass / aluminum composite), pressure rating (PN20/PN25), sizes, color series and quantity. We’ll send an FOB quote with certification docs and the full spec sheet.
Explore the system: PPR Fittings · Valves & Manifolds · Full Product Range
