Project-grade PPR, composite and PE piping for residential, commercial and municipal builds. Correct PN ratings for your working pressure, batch-consistent color, on-time delivery to your milestones, and a full technical document pack (SKZ / ISO / CE / WRAS) for site approval. Backed by a 30-year Turkish manufacturer exporting to 118+ countries.
We supply PPR and PE piping wholesale to contractors, project buyers and distributors, project quantities, not single-item retail.
Once pipe is inside a wall or under a floor, a mistake is not a return, it’s a re-work order, a missed handover, and a conversation with the client no one wants. Project buyers and MEP contractors aren’t buying pipe; they’re buying the absence of four specific failures. Bekaatherm is built to remove each one on paper, before your first container ships, with the right rating per run, a scheduled ship date, a single production batch, and a document pack your inspector signs.
Under-rated pipe fails on hot-water or heating loads, floods a finished floor, and the failure is buried in a wall where it is expensive to reach. Removed by: PN20 & PN25 plus fiberglass and aluminum-composite ranges, matched to your working pressure & temperature per run.
Material arrives after the pour or handover date and every downstream trade slips with it. Removed by: production scheduled to your pour, riser and handover milestones by our international export team, not a generic lead time.
A multi-batch delivery arrives with visible color and dimension drift and the client rejects it on sight. Removed by: single-batch allocation from 100% high-standard resin and our own 10,000 molds.
No TDS, certificates or test reports for the inspector, so the delivery sits un-approved on site. Removed by: a full technical document pack, TDS, SKZ / ISO / CE / WRAS, pressure test reports and a tolerance sheet.
Each fear above maps to a control we can put in writing, the right rating per run, a scheduled ship date, a single production batch, and the paperwork your inspector signs off. We don’t sell you “quality”; we hand you the evidence that removes the specific way your project can fail. See how we de-risk each stage below, from your BOM to your pour date.
See how we de-risk each stageThe fastest way to a burst is the wrong PN rating, and the fastest way to over-spend is over-rating every run. We help you match the rating to the load, cold water, hot water, radiator heating, or underfloor, so each line is safe without being wasteful. Our PPR range spans PN20 and PN25 in pure, fiberglass-composite and aluminum-composite constructions, from 20 to 63 mm, so a single supplier covers your whole pressure map.
| Diameter range | 20–63 mm (PPR system) |
| Pressure ratings | PN20 (20 bar @ 20 °C), PN25 (25 bar), PPR; PN10 (HDPE / PP compression) |
| Constructions | PPR pure · PPR-AL-PPR aluminum-composite · fiberglass-composite |
| Composite benefit | Reduced thermal expansion + oxygen barrier (heating & underfloor) |
| Color series | Green / White / Coffee (brown) |
| Application map | Cold & hot water, drinking water, radiator & underfloor heating, air-conditioning, fluid transfer |
| Working condition | Recommended construction | Typical rating |
|---|---|---|
| General cold water | PPR pure | PN20 |
| Hot water supply | PPR pure / composite | PN20–PN25 |
| Radiator & high-temp heating | Fiberglass or aluminum-composite | PN25 |
| Underfloor heating | Composite (low thermal expansion) | PN20–PN25 |
| Outdoor / municipal water | HDPE / PP compression range | PN10 |
High-temp selection in Solar & Underfloor Heating · read PN20 vs PN25 explained.
Spec writers and estimators don’t want a brochure adjective; they want the outer diameter and wall thickness that goes on the drawing. Below is the full Bekaatherm PPR pipe map, six constructions across six diameters, as outer diameter × wall thickness (mm). Every size is stocked as an article number in three color series (Green / White / Coffee), so a run you spec on paper is a run we can allocate to a single batch.
| OD (mm) | PPR pure PN20 | PPR pure PN25 | PPR-AL-PPR PN20 | PPR-AL-PPR PN25 | Fiberglass PN20 | Fiberglass PN25 |
|---|---|---|---|---|---|---|
| 20 | 20 × 2.8 | 20 × 3.4 | 20 × 3.1 | 20 × 3.4 | 20 × 2.8 | 20 × 3.4 |
| 25 | 25 × 3.5 | 25 × 4.2 | 25 × 3.3 | 25 × 4.2 | 25 × 3.5 | 25 × 4.2 |
| 32 | 32 × 4.4 | 32 × 5.4 | 32 × 4.1 | 32 × 5.4 | 32 × 4.4 | 32 × 5.4 |
| 40 | 40 × 5.5 | 40 × 6.7 | 40 × 5.0 | 40 × 6.7 | 40 × 5.5 | 40 × 6.7 |
| 50 | 50 × 6.9 | 50 × 8.4 | 50 × 5.5 | 50 × 8.4 | 50 × 6.9 | 50 × 8.4 |
| 63 | 63 × 8.6 | 63 × 10.5 | 63 × 7.0 | 63 × 10.5 | 63 × 8.6 | 63 × 10.5 |
Article numbers: PPR pure PN20 = BK-001–006 · PN25 = BK-007–012 · aluminum-composite PN20 = BK-01–06 / PN25 = BK-07–12 · fiberglass PN20 = BK-13–18 / PN25 = BK-19–24. Weight and packaging on request.
Send us the drawings and working conditions; we return a rated, costed, scheduled supply plan with the documents your inspector needs, before a single container leaves the floor.
Send the bill of materials, drawings, working pressure and temperature per run.
We confirm the correct PN rating and construction for each line and cost the full BOM.
Project quantities from consistent resin and 10,000 molds, allocated to one batch.
TDS, SKZ / ISO / CE / WRAS, pressure test reports and tolerance sheet prepared.
Production & container plan mapped to your pour, riser and handover dates.
Nothing gets a bulk delivery rejected faster than pipe that doesn’t match itself. When a project draws from mixed batches, the color and dimensions drift, and the client sees it before you do. We produce project quantities from consistent, 100% high-standard resin and our own 10,000 molds, and can allocate a single production batch per project so pipe and fittings match in color and dimension across every container. The result is an install that looks, and measures, like it came from one run, because it did.
Every line item in your BOM is manufactured in-house, same resin, same color series, same schedule. Below is a sample of the pipe, fittings, valves and manifolds we supply at project volume in Green, White and Coffee.
Splitting a project across three suppliers is how BOMs go wrong: mismatched thread standards, color that doesn’t align, and one late supplier holding up the whole trade. Bekaatherm supplies the full system from a single 120,000 m² plant, so your pipe, fittings, valves and manifolds are same-material, same-color and same-schedule. Send us the bill of materials and we’ll return it costed and complete, no line items left to source elsewhere.
| System | Scope for your project | Range | |
|---|---|---|---|
| PPR pipe | Pure, fiberglass & aluminum-composite, PN20/PN25 | 20–63 mm | PPR Pipes → |
| PPR fittings | Sockets, tees, elbows, unions, reducers, brass-insert & threaded fittings | BK-25–235 | PPR Fittings → |
| Valves & manifolds | Stop / ball / brass-union valves, 2–5-way heating manifolds, radiator & solar sets | BK-182–282 | Valves & Manifolds → |
| HDPE / PP compression | HDPE outdoor water & irrigation, saddle clamps, compression ball valves | PN10 | PE Compression → |
| UPVC drainage | Silent soil & waste, single/double branches, siphons, non-return valves | DN 50–200 | UPVC Drainage → |
Fittings, valves and manifolds all carry Bekaatherm article numbers (BK-xxx), so a full BOM can be quoted line-by-line against the catalogue. Installation tooling, hot-melt welding machine (BK-222), pipe cutter (BK-221) and PTFE tape (BK-220), supplied on request.
A construction BOM isn’t one application; it’s a building full of them, potable risers, hot-water loops, ceiling-void chilled lines, radiator drops and floor manifolds. Bekaatherm covers the whole map with one certified system, so each run gets the right construction and rating without a second supplier.
A material can’t enter an approved-supplier list without paperwork, and a delivery can’t pass inspection without it. Bekaatherm ships project supply with a complete technical document pack so consulting engineers can spec us in and inspectors can sign us off. Our piping is certified to SKZ (Germany), described in our catalogue as the strictest certification in the global piping industry, plus ISO TYPE-5, CE and WRAS, covering clean-water safety and market compliance in one file.
| Material TDS | Grade, properties & application data for the spec writer |
| SKZ / ISO / CE / WRAS certificates | Clean-water safety, compliance & customs clearance |
| Pressure test report | Verifies the run meets its PN rating |
| Dimensional tolerance sheet | Confirms fit & consistency for inspection |
| Declaration of conformity | For approved-supplier registration |
Certificate numbers and project-specific test reports are available on request.
Each mark answers a different question your inspector, spec writer and customs broker will ask. Together they let a consulting engineer approve the material without a site trial.
Our catalogue describes SKZ as the strictest certification in the global piping industry, it certifies product quality and supervises the enterprise’s production. Certificate no. on request.
Product conformity certification for consistent, repeatable quality across production batches. Certificate no. on request.
Conformity for market access and customs clearance across regulated destinations. Certificate no. on request.
Clean-water / potable-contact approval, the mark spec writers look for on drinking-water runs. Certificate no. on request.
What each standard means for your report → Certifications · SKZ, CE & WRAS explained.
On a project, “in stock” doesn’t matter, “on the date I need it” does. With 30 years of manufacturing, 120,000 m² of capacity and export experience across 118+ countries, we schedule production and shipment to your construction milestones rather than a generic lead time. Share your program and our international export team returns a delivery plan mapped to your pour, riser and handover dates, with the container plan and documents ready to move.
Pour / install / handover dates in → a production & shipment schedule aligned to them.
BOM & drawings in → a costed, complete BOM with no missing line items.
Port & Incoterm in → a container-loading & export document plan.
Confirmed lead times and delivery commitments are provided per project on request.
Export & logistics detail → Global Export & Logistics
Across 118+ countries, our piping runs in residential towers, commercial developments and municipal networks. Detailed project references, location, scale, application and outcome, are being published here.
| Project reference | Region | Application | Outcome |
|---|---|---|---|
| Coming soon | Coming soon | Coming soon | Coming soon |
| Coming soon | Coming soon | Coming soon | Coming soon |
Detailed case studies are being published. To see references relevant to your project type, ask our team.
One supplier for the whole BOM, correct PN ratings, single-batch consistency and delivery to your milestones, with the paperwork ready for approval before the container ships.
Submit your BOMFull-system supply, pipe, fittings, valves and manifolds, high-temp composite selection support, and fast reorders when the project scope moves mid-build.
Solar & Underfloor HeatingTDS, SKZ / ISO / CE / WRAS certification, pressure test reports and a dimensional tolerance sheet to spec us into your approved-supplier list.
Download the Technical Document PackFor the Contractor: Match the rating to working pressure and temperature. PN20 (20 bar @ 20 °C) covers general cold and hot water; PN25 (25 bar) and fiberglass/aluminum-composite pipe cover radiator and high-temp heating. Send us your pressure, temperature and application per run, and our team confirms the correct rating across your 20–63 mm map, safe without over-rating every line.
For the Spec Writer: Yes. Our PPR system runs 20, 25, 32, 40, 50 and 63 mm outer diameter across six constructions, for example PPR pure is 20×2.8, 32×4.4, 63×8.6 mm at PN20 and 20×3.4, 32×5.4, 63×10.5 mm at PN25. Every size is a stocked article number (BK-001 onward). Ask for the full dimension & tolerance table as a PDF.
For the Project Buyer: We produce project quantities from 100% high-standard resin and our own 10,000 molds, and can allocate a single production batch per project. Pipe and fittings then match in color and dimension across every container, removing the visible batch drift that gets bulk deliveries rejected by the client on site.
For the Consulting Engineer: Yes. We supply a full technical document pack, material TDS, SKZ / ISO TYPE-5 / CE / WRAS certification, pressure test reports and a dimensional tolerance sheet, so you can spec us in and inspectors can sign off. Certificate numbers and project-specific reports are available on request.
For the Project Buyer: We schedule production and shipment to your construction milestones, not a generic lead time. Backed by 30 years of manufacturing, 120,000 m² capacity and export to 118+ countries, our export team maps delivery to your pour and handover dates. Confirmed lead times are provided per project on request.
For the MEP Contractor: Yes. From a single 120,000 m² plant we supply the whole system, PPR pipe, fittings (BK-25–235), valves & manifolds (BK-182–282), HDPE / PP compression (PN10) and UPVC drainage (DN 50–200), same-material, same-color, same-schedule. Send us the BOM and we return it costed and complete, with no line items left to source from a second factory.
For the Project Buyer: We supply at project volume with a Low MOQ, exact quantities are confirmed per project on request. Beyond the indoor PPR system we also cover outdoor and municipal water with the HDPE / PP compression range (PN10, saddle clamps) and building soil & waste with the silent UPVC drainage system (DN 50–200), so a mixed-scope BOM stays with one supplier.
This solution pulls together the full Bekaatherm system. Follow the links to the product specs, the evidence pages your inspector needs, and the related solutions for your project type.
Tell us your application, working pressure and temperature, quantities, destination and milestone dates. We’ll return the right PN ratings, a complete costed BOM, single-batch supply, and the technical document pack, everything your project and your inspector need.
Explore the systems: PPR Pipes · Certifications · Quality Control & Testing · Global Export & Logistics
